| 1. | There are three basic types of matrix switch configurations
有三种基本的矩阵开关配置。 |
| 2. | Switching configuration required ( for example , multiplex , matrix , etc . )
所需要的切换配置（例如，复用器、矩阵等） 。 |
| 3. | A basic understanding of relay types and switching configurations is helpfulwhen choosing an appropriate switch system
基本了解继电器类型和切换配置有助于选择合适的开关系统。 |
| 4. | The matrix switch configuration is the most versatile because it can connect multipleinputs to multiple outputs
矩阵开关配置是最为灵活、通用的，它能够将多个输入连接到多个输出。 |
| 5. | The network engineer checks the switch configuration using the analyzer and confirms that some ports have been shut down
使用分析仪检查了交换机构造后，工程师认定有些端口已经被关闭了。 |
| 6. | This section describes the various types of switching configurations available : scanner , multiplex , matrix , isolated , and rf switching
本部分介绍各种类型的切换配置：扫描仪、复用器、矩阵、隔离开关和rf切换开关。 |
| 7. | These cards also make it easier to design a system that com ? bines various switching configurations , such as matrix , cascade , tree , etc
利用这些开关卡，可更方便地设计组合不同切换配置的系统，例如矩阵、级联、树形，等等。 |
| 8. | The isolated , or independent , switch configuration consists of individdual relays , often with multiple poles , with no connections between relays
隔离或独立开关配置由孤立的继电器组成，继电器往往有多个铡刀，继电器之间没有连接。 |
| 9. | As a result , switching configurations for rf signals are designed to minimize signal losses and maintain a characteristic impedance through the system
因此，射频信号的切换配置被设计为使信号损耗降至最低，并维持系统的特征阻抗。 |
| 10. | A switch may be preconfigured and only passwords may need to be entered for the user exec or privileged exec modes . switch configuration mode is entered from privileged exec mode
一台交换器可以预先组态成进入使用者执行模式或特权执行模式只需要输入密码。交换器组态模式是经由特权执行模式进入的。 |
